新型涂層支撐劑 開啟提高采收率新方向

Independent test results show this proprietary polyurethane-based formula delivers best-in-class bond strength, crush resistance and conductivity. U.S. Silica’s network of transload facilities served by Class I railroads allows InnoProp PLT to be delivered to locations within 100 miles of more than 80% of today’s active drilling rigs.

“With the challenges of today’s oil and gas pricing environment, completion engineers are seeking products that optimize production of hydrocarbons,” said Don Weinheimer, V.P. and general manager of U.S. Silica’s oil and gas division. “According to published test data, InnoProp PLT outperforms all other resin-coated products designed for low-temperature reservoirs, bonding without the use of an activator down to 70°F bottom-hole static temperature. It significantly reduces proppant flowback and provides increased conductivity which enhances hydrocarbon recovery. Furthermore, InnoProp PLT has the ability to re-bond, helping ensure continued performance under cyclic stress.”

InnoProp PLT is available in multiple mesh sizes and is compatible with all current fluid systems.

InnoProp? PLT，Polyurethane Low Temperature Resin-Coated Proppant

InnoProp? PLT is a formaldehyde-free resin-coated proppant designed specifically for low-temperature reservoirs. This new product, the latest in our suite of specialty proppants, reflects our commitment to continually meet customers’ demand for superior products that enhance the recovery of hydrocarbons.

Developed in-house by our team of scientists and engineers, this proprietary polyurethane-based formula delivers best-in-class performance, enabling bonding down to 70°F bottom-hole static temperatures without the use of an activator.

Outperforms Competing Low-Temperature Products*:

• Best-in-class bond strength, crush resistance and conductivity at lower temperatures
• Bonds in low-temperature reservoirs without the use of an activator
• Significantly reduces proppant flowback
• Increased conductivity provides enhanced hydrocarbon recovery
• Formaldehyde-free polyurethane resin coating
• Re-bonding capability helps to ensure continued performance under cyclic stress
• Durable coating reduces fines generation under cyclic stress
• Substrate is U.S. Silica White? sand, ensuring consistent quality in every shipment
• Compatible with all current fluid systems
• Available in multiple mesh sizes

Our broad network of strategically located transload facilities served by Class I railroads enables us to deliver InnoProp PLT where you need it, when you need it.? Recognizing that today’s competitive climate requires readily available product and superior customer service, our dedicated customer service representatives are available 24/7 to facilitate smooth delivery of your product.

Compatibility: This resin-coated proppant is fully compatible with most, if not all, commonly used fracturing fluids both water and oil based. Testing with specific fluids prior to pumping is highly recommended. Some fluids may require adjustment of pH control, breaker, or foamer loadings. Avoid prolonged exposure to highly alkaline fluids, i.e. pH greater than 12 and/or greater than the equivalent of 2.2 gallon free caustic soda per 1000 gallons of fluids.