中國石化新聞網訊 據今日海上能源網2019年2月24日休斯頓報道,??松梨诠救涨疤峤涣艘环萁涍^修訂以后的在吉普斯蘭盆地實施勘探鉆井的環境計劃,吉普斯蘭盆地距離澳大利亞東吉普斯蘭維多利亞州海岸90公里,其中包括鉆取超深水的Sculpin-1井。 ??松梨诠镜腣IC/P70區塊距離海岸大約90 – 100公里,VIC/P70區塊的水深從200米到3000米不等。鉆井水深分別為Hairtail-1井(359米)、Baldfish-1井(665米)和Sculpin-1井(2300米)。 2017年第二季度,位于深水吉普斯蘭盆地的VIC/P70區塊被??松梨诠诀庀碌娜Y子公司Esso深水公司收購。 ??松梨诠救ツ戢@得了Hartail-1井和Baldfish-1井的勘探鉆井權,并在2018年8月使用Ocean Monarch半潛式鉆機開始在那里開展海上勘探鉆井尋找新的天然氣資源。 如前所述,??松镜男掠媱潿F在包括了超深水探井Sculpin-1井。根據相關批準,??松梨诠居媱澰?019年第二季度末或第三季度初開始在Sculpin-1遠景構造上鉆井。 ??松梨诠局芩南虬拇罄麃唶液I鲜桶踩铜h境管理局(NOPSEMA)提交了修訂以后后的環境保護計劃。NOPSEMA預計將在今年3月25日決定是否接受該計劃。 李峻 編譯自 今日海上能源 原文如下: Exxon files EP plan for ultra-deepwater well in Gippsland basin, offshore Australia ExxonMobil has submitted a revised Environment Plan for exploration drilling in the Gippsland basin, 90 kilometers off the East Gippsland Victorian coast, Australia, to include the ultra-deepwater Sculpin-1 well.
Exxon’s VIC/P70 block is located approximately 90 – 100 km from shore, with water depth within VIC/P70 ranging from 200 meters to over 3 kilometers. The drill locations Hairtail-1, Baldfish-1, and Sculpin-1, sit at ~359 meters, ~665 meters and ~2,300 meters respectively. Block VIC/P70, in the deepwater Gippsland basin, was acquired by Esso Deepwater, a wholly owned subsidiary of Exxon Mobil Corporation, in 2Q, 2017. Exxon last year received approvals for the Hartail-1 and Baldfish-1 wells, and in August 2018 said it had started the offshore exploration drilling program there to search for new sources of gas, using the Ocean Monarch semi-submersible drilling rig. As mentioned, Exxon’s new plan now includes the ultra-deepwater exploration well Sculpin-1. Subject to relevant approvals, Exxon plans to start drilling at the Sculpin-1 prospect in the late second quarter of 2019, or in the early third quarter of the year. Exxon submitted the revised EP on Thursday to the National Offshore Petroleum Safety and Environmental Management Authority (NOPSEMA). NOPSEMA expects to come up with the decision on whether to accept the plan on March 25, 2019. ?
未經允許,不得轉載本站任何文章: