Range Resources Limited開始鉆探Trinidad MD 51-2開發井

Range is pleased to advise that the MD 51-2 development well (renamed MD 251 well) in Trinidad successfully spudded on 15 July 2016. The well is drilling ahead to a total depth of 3,900 feet and is expected to take approximately three weeks to reach target depth.

As previously announced, this will be a directional well to test the Middle and Upper Cruse sands, which were encountered with the MD 250 well. The initial log evaluations on the MD 250 development well identified multiple hydrocarbon bearing zones, with an estimated net pay of over 140 feet.

The well is being drilled by RRDSL (a wholly owned subsidiary of LandOcean Energy Services Co., Ltd) from the same drilling pad as the MD 250 well, using the same 4,000 metre rig. The wellhead of the MD 251 well is located approximately 20 feet from the MD 250 well. In line with safety requirements, production testing operations of the MD 250 and MD 251 wells will be performed once all drilling operations on the pad area are completed.

This is the second of the six well drilling programme which Range has planned for 2016. The remaining scheduled wells include two development wells in Morne Diablo, one development well in Beach Marcelle, and one exploration well in the Guayaguayare block. RRDSL’s further three new drilling rigs are pending final approvals from the Ministry of Energy and Energy Industries (MEEI), expected to be received during Q3 2016.